BJGSM - DOUBLE DUTY II CERAMIC TILE ADHESIVE

  • MSDS: BJGSM
  • Manufacturer: H B FULLER COMPANY
  • Product Name: DOUBLE DUTY II CERAMIC TILE ADHESIVE
  • National Stock Number: 8040-00F012924
Product Identification

Product ID:DOUBLE DUTY II CERAMIC TILE ADHESIVE
MSDS Date:09/23/1987
FSC:8040
NIIN:00F012924
MSDS Number: BJGSM

Responsible Party
H.B. FULLER COMPANY
1200 WALTERS BOULEVARD
VADNAIS HEIGHTS, MN 55110

Emergency Phone: (612) 481-3300

Info Phone: (612) 481-3300

Preparer: JOHN R. DOLMAR

Cage: 9R359

Contractor
HB FULLER CO.
PALATINE, IL 60067 US

Telephone: 847-358-9500/612-236-5842

Cage: 5P957

Ingredients

STODDARD SOLVENT

CAS: 8052-41-3

RTECS: WJ8925000

Fraction By Weight: 1-10%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM; 9293


ETHYLENE GLYCOL (SARA III)

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: 1-10%

OSHA PEL C 50 PPM

ACGIH TLV: C 50 PPM,VAPOR; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


48 GRAMS VOC/LITER

RTECS: 9999999VO

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN: IRRITATION. INHALATION:
DIZZINESS & HEADACHES. INGESTION: HARMFUL.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INGESTION: HARMFUL. EYES/SKIN: IRRITATION.
INHALATION: DIZZINESS & HEADACHE.

First Aid

First Aid:INGESTION: GIVE 1 GLASS OF WATER OR MILK. DON'T INDUCE
VOMITING. GET MED ATTN. EYES: FLUSH W/WATER FOR 15 MINUTES. GET MED
ATTN. SKIN: WASH AREA W/SOAP & WATER. REMOVE/LAUNDER CONTAMINATED
CLOTHING BE FORE REUSE. INHALATION: REMOVE TO FRESHAIR. KEEP WARM &
QUIET. GET MED ATTN.

Fire Fighting

Flash Point Method:SCC
Flash Point:100-199F
Lower Limits:1.0%
Extinguishing Media:DRY CHEMICAL, CO2, CHEMICAL FOAM, & WATER SPRAY
Fire Fighting Procedures:PERSONS EXPOSED TO THERMAL DECOMPOSITION
PRODUCTS SHOULD WEAR FULL PROTECTIVE EQUIPMENT INCLUDING
SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY RUPTURE WHEN
EXPOSED TO EXTREME HEAT.

Accidental Release

Spill Release Procedures:SCRAPE UP & PLACE IN DISPOSAL CONTAINER.

Exposure Controls

Respiratory Protection:NOT NORMALLY REQUIRED.
Ventilation:MECHANICAL
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES
Other Protective Equipment:EYE WASH
Supplemental Safety and Health
WT PER GAL: 11.2 LBS.

Chemical Properties

Boiling Pt:B.P. Text:>200F
Vapor Pres:2
pH:7.8
Percent Volatiles by Volume:34%

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HEAT
Hazardous Decomposition Products:LOW MOLECULAR WEIGHT HYDROCARBONS, CO

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE, AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.